Short Description:
PARAMETER |
|||
Model |
PW3200 |
PW5000 |
|
Rated power |
3200W |
5000W |
|
Standard voltage |
24VDC |
48VDC |
|
Installation |
Wall mount installation |
||
PVPARAMETER |
|||
Working model |
MPPT |
||
Rated PV input voltage |
360VDC |
||
MPPT tracking voltage range |
120-450V |
||
Max input voltage (VOC) at |
500V |
||
Max input power |
4000W |
6000W |
|
Number of MPPT tracking paths |
1Path |
||
I NPUT |
|||
DC input voltage range |
21-30VDC |
42-60VDC |
|
Rated mains power input voltage |
220/230/240VAC |
||
Grid power input voltage range |
170~280VAC(UPS model)/120~280VAC(inverter model) |
||
Grid input frequency range |
40~55Hz(50Hz) 55~65Hz(60Hz) |
||
OUTPUT |
|||
Inverter |
Output efficiency |
94% |
|
Output voltage |
220VAC±2%/230VAC±2%/240VAC±2%(Inverter model) |
||
Output frequency |
50Hz±0.5 or 60Hz±0.5(Inverter model) |
||
Grid |
Output efficiency |
≥99% |
|
Output voltage range |
Following input |
||
Output frequency range |
Following input |
||
Battery mode no-load loss |
≤1%(At rated power) |
||
Grid mode no-load loss |
≤0.5% Rated power(the charger of grid power doesn't work) |
||
BATTERY |
|||
Battery type |
Lead acid battery |
Equalizing charging 13.8V Floating charging 13.7V (single battery voltage) |
|
Customized battery |
The parameter can be set according to customers 'requirement |
||
Max mains charging current |
60A |
||
Max PV charging current |
100A |
||
Max charging current(Grid+PV) |
100A |
||
Charging method |
Three-stage (constant current, constant voltage, float charge) |
||
PROTECTED MODE |
|||
Battery low voltage range |
Battery low voltage protection value +0.5V(Single battery voltage) |
||
Battery voltage protection |
Factory default: 10.5V(Single battery voltage) |
||
Battery over voltage alarm |
Equal charging voltage +0.8V(Single battery voltage) |
||
Battery over voltage protection |
Factory default: 17V(Single battery voltage) |
||
Battery over voltage recovery Voltage |
Battery over voltage protection value-1V(Single battery voltage) |
||
Overload /short circuit protection |
Automatic protection(battery mode), circuit breaker or fuse (Grid mode) |
||
Temperature protection |
≥90℃ off output |
||
PERFORMANCE PARAMETERS |
|||
Conversion time |
≤4ms |
||
Cooling method |
Intelligent cooling fan |
||
Working temperature |
-10~40℃ |
||
Storage temperature |
-15~60℃ |
||
Altitude |
2000m(>2000m altitude need derating) |
||
Humidity |
0~95%(No condensation) |
||
Product Size |
420*290*110mm |
460*304*110mm |
|
Package Size |
486*370*198mm |
526*384*198mm |
|
Net weight |
8.5kg |
9.5kg |
|
Gross weight |
9.5kg |
10.5kg |
Parallel/PV Inverter Connection Diagram When connecting batteries in parallel, connect the positive terminal and the positive terminal (red) in parallel, and the negative terminal and the negative terminal (black) in parallel, the maximum number of parallels is 15 pieces, and the links between different series of lithium batteries and photovoltaics or inverters are shown in the figure as follows:
1. Product Warranty
The battery pack consists of photovoltaic inverters integrated with energy storage lithium batteries, and these modules are dedicated to the performance of the battery modules guaranteed for five years from the date o f product manufacture.This warranty does not cover any accessories and tool kits provided with the product.This warranty only covers the repair or replacement of defective products. We will repair or replace the product (if the product is defective and returned within the warranty period). Repaired or replaced products will continue for the remainder of the original warranty period. n either case, it should not be used as a reason to renew the warranty period.
2. Warranty conditions
Warranties relating to products apply only in the following cases1. Purchased from our company or our authorized dealer.2. Have an official serial number:
3. Install, operate and maintain according to the "Product Manual".
4. For daily use, use photovoltaic (PV) energy storage at 80% depth of dis charge.